YQ642F-Y three-way ball valve

Pneumatic Y three-way ball valve - non-calibration -Q642F is a 120° or 135° Angle line use of non-standard Angle three-way ball valve, for fluid switching or confluence use. Compact structure, beautiful appearance, good sealing performance. It can realize the switch of the flow direction of the medium in the pipeline, and can also make the two vertical channels connected or closed.
Pneumatic Y three-way ball valve - non calibration -Q642F model arrangement:
Worm gear Y three-way ball valve
Insert "3" after Q to indicate, example: Q342F-16C
Pneumatic Y-type three-way ball valve
Insert "6" after Q to indicate, example: Q642F-16C
Electric Y-type three-way ball valve
Insert "9" after Q to indicate, example: Q942F-16P
The above Q stands for: Ball valve. "3", "6" and "9" stand for: opening and closing device. 4 stands for: Flange connection. 2 represents: the flow channel structure characteristics of the valve. F represents: the sealing material is: PTFE. 16 stands for: Use pressure. C stands for: ball valve body material is: WCB, P stands for: 304 stainless steel.
Pneumatic Y three-way ball valve - non-calibration -Q642F Model: soft seal type [Q642F]
Pneumatic Y-type three-way ball valve - pneumatic stainless steel Y-type three-way ball valve [main parameters of valve body] :
1, the main function of use: 0-120°, 0-135° three-way pipeline ball valve
2, the main function of the pneumatic actuator: switch, adjust
3, the main function of the pneumatic actuator: double action (switch type), single action (normally open or normally closed)
4, air source interface thread diameter: G1/8 G1/4
5. Working air source pressure: (2-8bar)
6, ball valve connection classification number: 4. Flange
7, ball valve flow channel structure classification number: 2.Y three-way type
8, sealing material standard: soft sealing type 120 degrees below the normal temperature medium selection of "PTFE", 280 degrees below the high temperature medium selection: "RPTFE", 500 degrees below the high temperature medium selection: metal hard seal (304, alloy steel) material.
9, ball valve working pressure standard :1.6~10(MPa).
10, ball valve standard processing caliber: DN15 to DN300
11, ball valve temperature standard :0ºC to 550ºC.
The main material standard cast steel, 304 stainless steel, etc.
13, applicable media: water, steam, oil, liquefied gas, natural gas, gas, urea and other media.
Application conditions: petroleum, chemical industry, liquefied gas station, food, pharmaceutical, urban construction, building, water supply and drainage, water treatment, etc
Pneumatic Y-type three-way ball valve - non-calibration -Q642F Feature :
1, in the structure of the integrated structure, the sealing type of 4-side seat, flange connection, to achieve the three-way piping system non-standard design.
2, the ball core is divided into L shape, the flow capacity is large, the resistance is small, the shunt seal is tight.
3. According to the action type, there are two types of single action and double action. The single action type is characterized by a load of power source failure, the ball valve will automatically return to the status required by the control system design.
4. The valve is configured with manual operation mechanism for emergency switch use.